Before You Begin - Autoslide iLock Installation Manual

BEFORE YOU BEGIN

You will need a power point (outlet)
near your door to plug in your
AutoSlide unit. Confirm a power
point is near the installation position
and can be reached by the included
power cable. Otherwise, a heavy
duty extension cable or AutoSlide
extension cable can be used.
Note: If necessary, contact a
professional electrician to install a
new outlet or electric cabling.
WORKING ORDER
Assess the operating condition of your door before installing the
AutoSlide. Check the door:
 Rolls smoothly and is level. The best way to check if the
door is level is by closing the door, leaving a finger size
gap between door and jamb. Run your finger along the
gap to see if it is even from top to bottom.
 Track is clean and is free of foreign objects. If
necessary, use a silicone or aluminum based lubricant
to reduce resistance.
Note: If the door is not sliding smoothly or level, contact a
local professional to perform maintenance.
Close door completely
Check if edge of door isn't
parallel with edge of jamb
7
hh