Autoslide iLock Installation Manual page 17

TRACK MOUNTING
3)
d) Once secure, slide the door so that the next track mounting hole is close
to the motor wheel. While pushing upwards on the track to the motor
wheel, drill in the next screw.
e) Repeat for remaining mounting holes until track is entirely mounted to
sliding panel. Be sure to firmly hold the track up to the motor wheel each
time.
f) Once the track is attached to the door, open and close the door manually
to ensure the door runs smoothly without any interference. Ensure the
motor wheel is consistently engaging with the track in all positions.
Ensure the track is mounted to the
sliding panel at every available hole,
especially at the ends