What You'll Need - Autoslide iLock Installation Manual

WHAT YOU'LL NEED

A No. 2 flat head
screwdriver and
Phillips head
screwdriver are
recommended.
Needed to cut off
any excess rack
once sized to the
sliding panel width.
Depending on the door and mounting options, additional materials may be needed to
attach the system to the door. This may include shims to extend out the rack or move
the unit down, drywall anchors or concrete anchors, specialized screws, etc. For
mounting assistance, please contact Autoslide support staff directly with pictures of the
door and frame.
MOUNTING MEDIUM
DRYWALL
MASONRY
VINYL, WOOD
METAL
SCREWDRIVER
The unit and tracks
will need to be drill
mounted to the door.
An assortment of drill
bits is recommended.
HACK SAW
Needed for
marking and
measuring drill
holes, rack
lengths.
RECOMMENDED FIXING METHOD
DRYWALL ANCHORS
CONCRETE ANCHORS
TAPCONS
NORMAL SCREWS
SELF-TAPPERS
DRILL PILOT HOLE & SELF-TAPPERS
TAPE MEASURE & MARKING PENCIL
DRILL
5
hh