Q & A; Setting Up The Printer - Brother HL-3400CN Series User Manual

Q & A
This section contains commonly asked questions and the answers
concerning your HL-3400CN printer. If you have encountered a problem,
find your question below and follow the recommended steps:

Setting Up the Printer

Question
The printer does not come on.
The printer does not print.
Recommendation
Check the following;
The printer is securely plugged into the AC outlet.
The power source is active.
The Power button is on.
Check the following:
The printer is turned on.
The printer is Online.
All of the protective parts have been removed.
All the covers on the printer are closed.
The toner cartridges are installed properly.
The 'toner empty' message is not displayed on the
LCD. If one or more are on, replace the toner
cartridges.
The interface cable is securely connected between
the printer and computer.
The Alarm LED is blinking. If the LED is
blinking, refer to the Operator Call section of this
manual.
The HL-3400CN printer is selected in the printer
settings in your application.
The host is configured correctly: check the printer
port, print manager etc. (clear stored job or turn
off 'Use Print Manager')
There is no jammed paper inside the printer.
Paper is loaded in the Media Cassette.
An Error message is not displayed.
CHAPTER 6 TROUBLESHOOTING
6–13