Manual Feed - Brother HL-3400CN Series User Manual

Manual Feed

Since this printer does not have a manual feed or multi purpose tray, you
cannot manually feed irregular sized paper. However, this printer has a
special Manual Feed Mode using Tray 1 (upper tray) to accommodate
non-standard paper sizes.
See "Manual Mode" in Chapter 4
setting in the printer control panel.
1. When the manual feed command is selected, the printer waits until
you load the paper in Tray 1 during manual feed mode operation.
2. Pull out Tray 1 and place the paper you are going to use in the tray. It
may be necessary to remove some or all of the paper stack first,
depending on the size of paper in the tray and the size of the paper you
wish to print on manually.
3. Re-install Tray 1 and press the Continue button. The printer then
starts printing.
Note
Print quality may be affected by the type of paper you use and the
print image.
CHAPTER 3 BEFORE WORKING WITH THE PRINTER
for more information on selecting this
T1 MANUAL FEED
**** SIZE
3–17