Printing The Test Patterns Or Lists - Brother HL-3400CN Series User Manual

Printing the Test Patterns or Lists

You can check print quality and print a list of available fonts before you
actually start working with the printer. To do so, follow these steps:
1.
2
3.
4.
5.
To Print
the Demonstration Page
the Test Pattern
the list of printer settings
the list of internal or resident fonts
the list of optional card fonts
the list of permanent download fonts
Notes
The messages "PRINT FONTS C" or "PRINT FONTS P" appear only
when an optional font card is installed in the font slot or when permanent
download fonts are stored in printer memory.
If the optional font card is installed, you can print a list of optional
fonts. Since the list shows the ID numbers specific to each optional
font, it helps you select them with the Font button. For more
information, see
If user-defined characters are already downloaded into the printer
memory as permanent download fonts, you can print a list of them.
For more information, see
Make sure that you have already installed the toner cartridges,
the OPC Belt Cartridge, the Oil Bottle and the Fuser Cleaner
and have loaded paper into the cassette. Make sure that you
have removed the protective parts on the Waste Toner Pack.
Turn on the printer. Wait until the display shows the following
message:
LJ READY 001P T1
AUTO
K C M
Press the Sel button to take the printer off-line.
The On Line LED goes off.
Hold down the Shift button and press the Test button. Release
both buttons.
Press the or button to scroll through the display until the
desired message appears.
Choose from one of the following selections:
To exit from the test mode, select "
"FONT Button" in Chapter
"FONT Button" in Chapter
CHAPTER 2 SETTING UP THE PRINTER
Y
LCD Message
DEMO PAGE
TEST PRINT
PRINT CONFIG
PRINT FONTS I
PRINT FONTS C
PRINT FONTS P
exit
".
4.
4.
2–21