Fuser Cleaner - Brother HL-3400CN Series User Manual

Fuser Cleaner

Fuser Cleaner Message
When the following message appears on the LCD panel, the printer will
stop printing and the Fuser Cleaner will need to be replaced:
Fuser Cleaner Change Message
When the following message appears on the LCD panel and the printer
stops printing, you must replace the Fuser Cleaner:
Replacing the Fuser Cleaner
The Fusing unit and the parts around it are HOT! Be sure to wait
until the Fusing Unit has cooled sufficiently before replacing the
Fuser Cleaner.
If you touch the HOT parts, you might get injured.
1. Press the Power button to turn the printer off and wait until it has
cooled down sufficiently.
2. Open the Top Cover.
REPLACE FCR
24 CHANGE FCR
Warning
CHAPTER 5 MAINTENANCE
5-9