Set Button - Brother HL-3400CN Series User Manual

Notes
When you press the Sel button, remember the following:
All other buttons—except the Sel button—are operational only when
the printer is off-line.
If the printer is not in AUTO emulation mode, the LCD displays the
current emulation by pressing the Sel button to take it off-line, but
you cannot enter other emulation modes. To make settings in other
emulation modes, press the Emulation button and select the
emulation.
The Sel button works as a "quick exit" button. If you are lost in the
display menus or you want to quickly exit the display menu, press the
Sel button. You can exit quickly from any level of the display menu
to the on-line mode. If you have already made a setting effective by
pressing the Set button and then press the Sel button to quickly exit,
your setting (whether made by accident or on purpose) will remain
effective. Pressing the Sel button will not cancel any setting.

SET Button

Pressing the Set button allows you to select certain items on the display
or make the displayed menu or setting effective. The button also works as
an execute button to perform the displayed function.
When you press the Set button, the printer stores the settings you have
selected into the memory as "User Settings." Every time you turn on the
printer, it is reset to these user settings. They remain effective until you
make new settings or restore them to the factory settings. For factory
reset, see
Note
When you press the Set button to select a setting, for a short time an
asterisk appears at the end of the display. Since the asterisk then indicates
the current selection, you can easily find the current setting again when
you scroll through the display.
(UP) or (DOWN) Button
Press the
through the menus and settings. Press or continue pressing the button
until you locate your desired option.
"RESET Button" in this chapter.
(UP) or (DOWN) button to scroll forward or backward
CHAPTER 4 CONTROL PANEL
4–7