Brother HL-3400CN Series User Manual page 26

Power Save Mode
This printer has a power saving mode. Since laser printers consume
power to keep the fixing assembly at a high temperature, this feature can
save electricity when the printer is on but not being used. The factory
setting of the Power Save mode is ON so that it complies with the new
EPA Energy Star specification.
Toner Save Mode
This printer has an economical Toner Save Mode. By using this feature
you can substantially reduce printer operating costs and extend the life
expectancy of the toner cartridges.
Reprint Function
You can reprint the last print job with a touch of a panel button, which
allows reprinting of multiple copies of the job without sending the data
again from the computer.
When there is not enough memory to print the last job, you can reprint
the last print page.
PCMCIA Card Slot
The printer has 2 Type II PCMCIA card slots that also allow the use of 1
Type III device. You can install PCMCIA-compatible flash memory and
HDD cards.
Flash memory card: You can store fonts, macros, logos and other print data.
HDD card:
Saving User Settings
You can personalize the printer by customizing your own control panel
button settings. Two sets of user settings can be stored.
You can store fonts, macros, logos and other print
data as well as keeping data for printer usage analysis.
CHAPTER 1 INTRODUCTION
1-5