Install The Printer Driver - Brother HL-3400CN Series User Manual

Install the Printer Driver

Computer Requirements
The following are the minimum computer requirements to setup and
operate the printer:
CPU:
RAM:
Hard Disk Drive: 10Mbyte free space available for the driver and Fonts
OS:
For Windows 3.1x, 95/98 & Windows NT 4.0 Users
You can configure your Windows Operating System for this printer by following
the Initial Setup instructions on the supplied CD-ROM.
1. Turn your PC power on and insert the CD-ROM into the CD-ROM drive.
2. The opening screen will appear automatically in Windows 95/98 or Windows
NT 4.0.
3. If the screen does not appear, click 'Start' and choose 'Run', enter the CD drive
letter and type 'START.EXE'.
If you are using Windows 3.1x, click 'Run' from the 'File Menu' in 'Program
Manager', enter the CD drive letter and type 'START.EXE'.
4. Select 'HL-3400CN series', and then select the language you require. Follow
the instructions that appear on screen..
5. Click the 'Install Driver & Software', select the printer driver type you want to
install.
6. After the printer driver has been installed, the HL-3400CN series window will
appear. Follow the onscreen messages to complete the installation.
80486 or higher
(Pentium recommended)
8 MB or more for Windows 95/ 98, 3.1x and Windows
NT 4.0
(16 MB or more recommended)
(more space is necessary for printing)
Windows 95/ 98, 3.1x and Windows NT 4.0
CHAPTER 2 SETTING UP THE PRINTER
2–23