Buttons In Normal Mode; Sel Button - Brother HL-3400CN Series User Manual

USER'S GUIDE

BUTTONS IN NORMAL MODE

SEL Button

4–6
You can control the basic printer operations and change various printer
settings in the NORMAL mode. Functions available in the NORMAL
mode are shown above the panel buttons.
Emulation Mode
Ready
Alarm
Mode
Continue
Fig. 4-3 Buttons in NORMAL Mode
Note
The factory settings are printed in bold in this section.
Pressing the Sel button toggles the printer mode between on-line and off-
line. When the printer is on-line, the On Line LED lights are illuminated
and the printer is ready to receive data from the computer. When the
printer is off-line, the On Line LED is off.
To receive data from the computer, place the printer on-line. To operate
the control panel buttons, take the printer off-line.
If you press the Sel button when the printer is on-line, it takes the printer
off-line and the LCD displays the current emulation.
You can enter other emulations in the
pressing the (UP) or
Copy Pages Orientation Feeder
Toner K C M Y
On Line Data
Sel Form Feed
Font
Set
AUTO
emulation mode by
(DOWN) button.