Brother HL-3400CN Series User Manual page 95

USER'S GUIDE
AUTO Mode
AUTO LF
AUTO CR
AUTO WRAP
AUTO SKIP
AUTO MASK
4–24
Note on "AUTO MASK"
When you use application software in non-HP modes, be sure to set
"AUTO MASK" to ON. When you use letter or A4 size paper, the top
and bottom 2 lines are masked and they do not appear on the printout.
The auto modes are subject to the current emulation mode.
O : The auto modes can be set.
X : The auto modes cannot be changed and no setting appears.
— : The auto modes are not available.
Printer Emulation (Factory settings in bold print)
HP
PCL5C
O OFF
O OFF
O OFF
O ON
—
Note
In the IBM emulation mode, FF codes are always followed by a CR code.
PAGE FORMAT MODE
Notes
The settings in this mode menu will vary as follows:
All settings are effective in the HP PCL5C, EPSON FX-850 and IBM
Proprinter XL modes.
The X and Y (vertical and horizontal) offsets are effective in the BR-
Script 2 mode. Other settings are not effective and they do not appear
in this mode.
The paper size and the X and Y (vertical and horizontal) offsets are
effective in the HP-GL mode. Other settings are not effective and they
do not appear in this mode.
EPSON IBM
FX-850 Proprinter XL
O OFF O OFF
X ON O OFF (Note)
X ON X ON
— —
O OFF O OFF