Brother HL-2060 User Manual page 119

USER'S GUIDE
4–44
Once you save the download font in the card, you do not need to
download the font every time you need it.
Since the flash memory card or the HDD card is in the slot of the printer,
you can select the saved fonts as "CARD1 FONT" or "CARD2 FONT"
with the FONT switch or the font selection command from your software.
For font selection, see "FONT Switch" in Chapter 4.
You can check the fonts saved on the card by printing the list of fonts with
the TEST switch. See "TEST Switch" in Chapter 4.
Note
When the fonts on the HDD card are selected in a print job, they are
copied into the printer RAM. It may tend to cause the printer memory full
error because those fonts occupy some RAM space. It is recommended to
install optional SIMM to use the downloaded fonts on the HDD card.
Delete
When you select "DELETE" and press the SET switch, you can enter the
following sub-setting menus to delete macros and fonts or format the
installed flash memory card or HDD card:
Display Message
MACRO ID=#####
DATA ID=#####
FONT ID=#####
FORMAT CARD
• Macro
When you press the SET switch at "MACRO ID=#####," the cursor
moves to the ID number. The printer prompts you to select the ID number
of the macro to be deleted.
MACRO ID=#####
Select the ID number with the
so that the printer deletes the selected macro.
Delete Menu
Delete the selected ID macro.
Delete the selected ID data.
Delete the selected ID font.
Format the flash memory card or the HDD
card.
or switch and press the SET switch,