Installation From Floppy Disks; For Windows 95/98; For Windows 3.1 - Brother HL-2060 User Manual

USER'S GUIDE

INSTALLATION FROM FLOPPY DISKS

For Windows 95/98

For Windows 3.1

1–8
You need to configure Windows for the printer by installing the printer
driver and TrueType-compatible fonts from the supplied floppy disks.
1. Insert the supplied floppy disk labeled "disk1" into your floppy disk
drive.
2. Click the Start button and select Settings.
3. Select Printers and double
click the Add Printer icon.
4. Follow the instructions in Windows 95/98.
Because the supplied printer driver and fonts are compressed on the
floppy disks, be sure to use the supplied installer program to install them.
These instructions assume you will install the driver and fonts from the
floppy disk drive A:.
1. Start Windows 3.1.
2. Insert the supplied disk for Windows into your floppy disk drive.
3. Choose Run from the File menu in the Program Manager.
4. Type the drive name where you
inserted the supplied disk and
"SETUP" in the box: for
example, A:\SETUP. Click
the OK button or press the
Enter key.