About The Control Panel; Selecting The Local Language Display; Turning The Maintenance Message Off - Brother HL-2060 User Manual

ABOUT THE CONTROL PANEL

Selecting the Local Language Display

The display usually shows the current printer status. When you operate
the control panel switches, it shows functions and settings. If any
problems occur, it shows the corresponding error message. You can see
these messages in several languages. The default language is English.
• English
• French
To change to another language:
1. Turn off the printer.
2. Hold down the FORM FEED switch and turn on the printer.
The message "SELF TEST" appears and then the message changes to
"LANG.=ENGLISH * ".
3. Press the
display.
4. Press the SET switch to make the selected language message
effective.
An asterisk (*) appears at the end of the display for a short time, and
then the printer automatically returns to on-line state with the selected
language message on the display.

Turning the Maintenance Message Off

This printer periodically prompts you to replace parts to enjoy high
quality and reliable printing jobs.
Turning the messages off:
You can turn these messages off by taking the following steps.
1. Turn on the printer with pressing the "FORM FEED" key.
2. Choose "MAINTENANCE" with the
3. Choose "MAINTENANCE = OFF" with the
SET key.
CHAPTER 3 BEFORE WORKING WITH THE PRINTER
• German • Spanish
• Dutch • Italian
or switch until your desired language appears on the
• Norwegian • Danish
• Finnish • Portuguese
key and press the SET key.
key and press the
3–7