Brother HL-2060 User Manual page 17

Remove a short section of the coloured insulation to expose the wires.
The wire which is coloured green and yellow must be connected to the
terminal in the plug which is marked with the letter "E" or by the safety
earth symbol
The wire which is coloured blue must be connected to the terminal which
is marked with the letter "N" or coloured black or blue.
The wire which is coloured brown must be connected to the terminal
which is marked with the letter "L" or coloured red or brown.
The outer sheath of the cord must be secured inside the plug. The
coloured wires should not hang out of the plug.
DECLARATION OF CONFORMITY (EUROPE)
We,
declare that this product is in conformity with the following normative
documents:
Safety:
EMC:
following the provisions of the Low Voltage Directive 73/23/EEC and
the Electromagnetic Compatibility Directive 89/336/EEC (as amended by
91/263/EEC and 92/31/EEC).
Manufacture at the following facilities is carried out under a Quality
System which is registered by BSI Quality Assurance and JQA Quality
Assurance.
Brother Industries, Ltd., Kariya Plant
1-5, Kitajizoyama, Noda-cho, Kariya-shi,
Aichi-ken 448-0803, Japan.
BSI Certificate of Registration No. FM27391
JQA Certificate of Registration No. 0340
* When used with the DX-2000, this product complies with EN 55022
Class A.
Issued by:
Brother International Europe Ltd.
European Development and Technical Services Division
, or coloured green or green and yellow.
Brother International Europe Ltd.,
Brother House 1 tame Street, Guide Bridge,
Audenshaw, Manchester M34 5JE, UK.
EN 60950,
EN 55022 Class B, EN 50082-1
EN 60825
REGULATIONS
xv