Brother HL-2060 User Manual page 98

When you enter the setting mode, the display first shows the current
orientation with an asterisk.
ORI=PORTRAIT
Press the or switch until the desired orientation appears on the
display.
Display Message
ORI=PORTRAIT
ORI=LANDSCAPE
Press the SET switch to make the displayed selection effective.
An asterisk appears at the end of the display for a short time. Then the
printer automatically exits from the setting mode to the FORMAT
MODE.
When portrait has been selected, the display may look as follows:
00 READY 001P T1
When landscape has been selected, the display may look as follows:
00 READY 001L T1
CHAPTER 4 CONTROL PANEL
*
Orientation
Portrait
Landscape
4–23