Advanced Mode; Network Mode - Brother HL-2060 User Manual

USER'S GUIDE

ADVANCED MODE

4–46

NETWORK MODE

Display Message
LOCK PANEL=OFF
AUTO FF=ON
FF SUPPRESS=OFF
TONER LOW=CONT
Lock panel
If someone other than you has changed the panel switch settings and you
do not know about it, the printer may not print as you expected or it may
not print at all.
To cope with this problem, you can lock or unlock the panel switches
with your pass number as follows:
Display Message
LOCK=OFF
LOCK=ON
Even if you lock the panel switches, you can use the SEL, FORM FEED,
COPY, CONTINUE, RESET and TEST switches. You can only check the
settings of the other switches, but you cannot change them. To change
them, unlock the panel switches.
When you lock or unlock the panel switches as above, you need to enter a
3-digit pass number.
PASS NO=***
Change the number with the
with the SET switch. After you finish entering your 3-digit pass number,
the panel switches are locked or unlocked.
Network Mode
Turns on or off lock panel function.
Turns on or off auto form feed.
Turns on or off the form feed suppress
function.
Select the printer's action when "TONER
EMPTY" is detected
Lock Panel
Unlock the panel switches of the printer.
(Factory setting)
Lock the panel switches of the printer.
or switch and move to the next digit