Save Settings - Brother HL-2060 User Manual

INPUT
BUFFER
SIZE
849K
264K
30K
8M 16M

SAVE SETTINGS

Suppose you share this printer with others who want different panel switch
settings or you use the printer with different settings.
Since you can save the current settings in the printer's memory, you can
easily reset the printer to your necessary settings after they are changed.
For resetting the printer, see "RESET Switch" in Chapter 4.
Use the panel switches to set the configuration of the printer to your needs
and then enter this mode menu to save your settings. Two sets of user
settings can be saved in the printer as follows:
Display Message
SAVE SETTING 1
SAVE SETTING 2
If you want to check the user settings, you can print out a list of the
settings with the TEST switch.
Note
No user settings have been factory set.
CHAPTER 4 CONTROL PANEL
15 SQUARES
5 SQUARES
32M
Fig. 4-7 Input buffer size
User Setting
Save the current settings as No. 1 in the
printer's memory.
Save the current settings as No. 2 in the
printer's memory.
See "TEST Switch" in Chapter 4.
47M
13M
1 SQUARE 30K
72M
RAM SIZE
4–51