Getting Started; Initial Setup; Setting The Date And Time; Setting Tone And Pulse Dialing Mode (For Canada Only) - Brother MFC-7420 User Manual

2

Getting started

Initial setup

Setting the Date and Time

When the MFC is not in use it will display the
date and time. If you set up the Station ID the
date and time displayed by your MFC will be
printed on every fax you send. If there is a
power failure, you may have to reset the date
and time. No other settings will be affected.
1
Press Menu/Set, 0, 2.
Initial Setup
2.Date/Time
2
Enter the last two digits of the year.
Press Menu/Set.
3
Enter two digits for the month.
Press Menu/Set.
(For example, enter 09 for September,
or 10 for October.)
4
Enter two digits for the day.
Press Menu/Set.
(For example, enter 06 for 6th.)
5
Enter the time in 24-Hour format.
Press Menu/Set.
(For example, enter 15:25 for 3:25 P.M.)
6
Press Stop/Exit.
The LCD now shows the date and time
whenever the MFC is idle in Fax mode.
When the MFC is in Sleep mode, the
LCD shows Sleep . (See Sleep Time on
page 2-6.)
2 - 1
Setting Tone and Pulse
dialing mode
(For Canada only)
1
Press Menu/Set, 0, 4.
Initial Setup
4.Tone/Pulse
2
Press ▲ or ▼ to select Pulse (or Tone ).
Press Menu/Set.
3
Press Stop/Exit.