General Setup; Setting The Mode Timer; Setting The Paper Type - Brother MFC-7420 User Manual

Chapter 2

General Setup

Setting the Mode Timer

The MFC has three temporary mode keys on
the control panel: Fax, Scan and Copy. You
can change the number of seconds or
minutes the MFC takes after the last Scan or
Copy operation before it returns to Fax mode.
If you select Off , the MFC stays in the mode
you used last.
1
Press Menu/Set, 1, 1.
General Setup
1.Mode Timer
2
Press ▲ or ▼ to select 0 Sec ,
30 Secs , 1 Min , 2 Mins , 5 Mins or
Off .
Press Menu/Set.
3
Press Stop/Exit.
2 - 3

Setting the Paper Type

To get the best print quality, set the MFC for
the type of paper you are using.
1
Press Menu/Set, 1, 2.
General Setup
2.Paper Type
2
Press ▲ or ▼ to select Plain , Thin ,
Thick , Thicker , Transparency or
Recycled Paper .
Press Menu/Set.
3
Press Stop/Exit.
Note
■
The MFC ejects paper with printed
surfaces face down onto the output paper
tray in the front of the MFC. When you use
transparencies or labels, remove each
sheet immediately to prevent smudging or
paper jams.
■
You can select Transparency in Step 2
only if Letter , Legal or A4 paper size
was selected as the paper size
(Menu/Set, 1, 3).