Getting Started; Entering Photocapture Mode - Brother DCP-330C User Manual

Chapter 5

Getting started

Firmly put the card into the correct slot.
®
1 CompactFlash
2 SecureDigital™, MultiMediaCard™
®
3 Memory Stick , Memory Stick Pro™
4 xD-Picture Card™
PhotoCapture key indications:
PhotoCapture light is on, the media card
is properly inserted.
PhotoCapture light is off, the media card
is not properly inserted.
PhotoCapture light is blinking, the media
card is being read or written to.
CAUTION
DO NOT unplug the power cord or remove
the media card from the media drive (slot)
while the machine is reading or writing to
the card (the PhotoCapture key is
blinking). You will lose your data or
damage the card.
The machine can only read one media card at
a time so do not put more than one card in the
slot.
34
5
1 2 3 4

Entering PhotoCapture mode

After you insert the media card, press the
(PhotoCapture) key to illuminate it in
green and display the PhotoCapture options
on the LCD.
The LCD shows:
PHOTO
View Photo(s)
Print Index
Print All Photos
Print Photos
Select & Press
Press a or b to scroll through the
PhotoCapture key options.
View Photo(s) (See page 35.)
Print Index (See page 35.)
Print All Photos (See page 36.)
Print Photos (See page 36.)
Note
If your digital camera supports DPOF
printing, see DPOF printing on page 37.
When the option you want is highlighted,
press OK.
5
OK