Redial; Tone/Pulse; Searching Telephone Index - Brother MFC-7050C User Manual

Redial

If you dialed using
clear the line. You can dial again easily by pressing

Tone/Pulse

If you have pulse dialing service, but need to send tone signals
(for telephone banking, for example), follow the directions below.
If you have touch tone service, you do not need this feature to
send tone signals.
1
2
3

Searching Telephone Index

See
You can search for names you have stored in One Touch and Speed
Storing One
Dial memories. Names are stored alphabetically.
Touch Dial
1
Numbers
p. 8-1
and
2
Storing Speed
Dial Numbers
3
p. 8-3
4
5
6
9-4
T E L E P H O N E O P E R A T I O N
Hook
Lift the handset.
Press . Digits dialed after this send tone signals.
When you hang up, the MFC returns to pulse dialing service.
Tel-index
Press , then enter the first letter of the name you're
looking for.
Press or to search the memory.
When the screen displays the name you want to call, press
Hook , (or for a voice call, pick up the handset).
Press Start to begin dialing.
Hook
If you pressed
the other party answers. (The speaker works only one way; the
other party won't be able to hear you unless you pick up the
handset.)
When the call is over, hang up.
and got a busy signal, press
to dial the call, pick up the handset when
Hook
again to
Redial/Pause
.