Brother MFC-7050C User Manual page 124

If You Don't Have a CD-ROM Drive
All software is supplied on CD-ROM. If you need a Floppy Disk
version (only Multi-Function Link
LE are available on Floppy Disks, item numbers DSK7031 (for
Windows
If you are using Windows NT
software is not available on Floppy Disks). You must tell the
Brother Representative the version of Windows
using and your MFC model number. To order, call Brother at
1-888-879-3232 (USA), 1-800-668-2768 (from within Canada)
or 1-514-685-6464 (from within Montreal).
Windows NT
available in the late Spring of 1999.
Computer Requirements
The following are the minimum computer requirements you need
to set up and operate the MFC as a printer. Use only a shielded
interface cable that is IEEE-1284 compliant, and that is less than 6
feet (1.8 meters) long.
CPU
RAM
Disk Drives
Operating System Windows
14-2
S E T T I N G
®
3.1x) and DSK7095 (for Windows
®
Workstation 4.0 software and drivers will be
Pentium 75 or Higher
16MB or greater for Windows
16MB or greater for Windows
16MB or greater for Windows NT
Version 4.0 (32MB recommended)
50MB Hard Drive Space Available
2x CD-ROM Drive
®
Version 4.0, DOS environment compatible with
your Windows
U P M F C W I T H Y O U R
®
Pro and Visioneer PaperPort
®
95/98).
®
Workstation Version 4.0, the
®
3.1x, 95/98 or NT
®
version
C O M P U T E R
®
®
that you are
®
3.1x
®
95/98
®
Workstation
Workstation