Real Time Transmission; Checking Job Status - Brother MFC-7050C User Manual

Real Time Transmission

When Memory is full, the MFC cannot continue scanning
documents into memory before sending. However, you can turn on
REALTIME TX. Then place the documents in the feeder and enter
the fax number. As soon as the phone line is free, the MFC starts
dialing and sending the fax.
1
2
3
4
5
6

Checking Job Status

You can check which jobs are in memory waiting to be sent. Press
Function
7-4
S E T U P S E N D
Place the document in the feeder.
Function
Press , 1 ,
3
To change the default setting, press
Set
OFF) and press
transmission only, press
Set
and press .
REALTIME TX:OFF?
SELECT
For the next fax only, press
Set
and press .
ACCEPTED
OTHER SETTINGS?
1.YES 2.NO
Press if you want to select additional settings. The display
1
returns to the SETUP SEND menu—OR—Press
finished choosing settings and go to Step 6.
Enter the fax number and press
, , to check it.
1 4
, .
7
. Go to Step 5—OR—For the next fax
or to select NEXT FAX ONLY
& SET
or to select ON (or OFF)
Start
.
or to select ON (or
if you are
2