Remote Fax Options (Not Available For Color Fax); Fax Forwarding/Paging; Programming A Fax Forwarding Number; Programming Paging Number - Brother MFC-7300C Owner's Manual

Remote Fax Options
9
9
(Not Available for Color Fax)

Fax Forwarding/Paging

You cannot use Paging and Fax Forwarding at the same time.
You cannot use Paging and Fax Forwarding when Fax Storage is set to OFF.

Programming a Fax Forwarding Number

When Fax Forwarding is set to ON, your MFC stores the received fax in
memory, then dials the fax number you've programmed, and forwards the fax
message.
1
Press Function, 1, 7, 1.
2
Press
or
FAX FORWARD? and press Set.
3
The screen prompts you to enter the
number of the fax machine where faxes
will be forwarded. Enter the forwarding
number (up to 20 digits) and press Set.
4
Press Stop to exit.

Programming Paging Number

When Paging is selected, your MFC dials the pager number you've programmed,
and dials your Personal Identification Number (PIN) when connected, to activate
your pager and let you know you have a fax message in the memory.
1
Press Function, 1, 7, 1.
2
Press
or
PAGING? and press Set.
3
Enter your pager phone number (up to 20
digits) followed by # # and press Set.
Do not include the area code if it is the
same as that of your MFC.
For example, 1 8 0 0 5 5 5 1 2 3 4 # #.
4
If your pager requires a PIN, enter the PIN, press #, press Redial/Pause, enter
your MFC telephone number, press # #, then press Set.
For example, 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #
—OR—
If you do not need a PIN, press Redial/Pause, enter the fax number of your
MFC, then press # # and press Set.
For example, Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #
9 - 1
R E M O T E F A X O P T I O N S ( N O T A V A I L A B L E F O R C O L O R F A X )
until the screen displays
until the screen displays
FAX FORWARD?
FWD#:
ENTER & SET
PAGING?
PAG#:
ENTER & SET