Table of Contents
Advertisement
5
Setup Receive
5
Basic Receiving Operations
Select Receive Mode
There are three different receive modes for your MFC. You may choose the
mode that best suits your needs by pressing Receive Mode repeatedly until the
screen displays the setting you want to use.
LCD
FAX
(automatic receive)
EXT.TEL/TAD
(External telephone/
External Telephone
Answering Device)
MANUAL
(manual receive)
To select or change your Receive Mode
1
Press Receive Mode. The LCD shows your current selection.
2
Continue to press Receive Mode until your new selection appears. After two
seconds, the LCD returns to the date and time display, along with your new
Receive Mode setting.
How it works
The MFC automatically
answers every call as a fax.
If an external telephone is
connected to the EXT. jack,
you control the phone line
and must answer every call
yourself.
If an external TAD
(telephone answering
device) is connected to the
EXT. jack, the TAD
automatically answers
every call. Voice messages
are stored in the external
TAD. Fax messages are
printed.
You control the phone line
and must answer every call
yourself.
EXT.TEL/TAD
When to use it
For dedicated fax lines.
Use this mode if you
receive very few faxes.
Use this mode if you have
an external answering
machine on your phone
line.
Use this mode when you are
using a computer modem on
the same line or if you receive
very few fax messages.
FAX ONLY
MANUAL
S E T U P R E C E I V E
5 - 1
Advertisement
Table of Contents
