Rice Lake 880 Performance Series Installation Manual

880 Performance
Analog Output Option Card Installation
The Analog Output Option Card provides a single analog output port for an 880 indicator when installed. The Analog Output
Option Card attaches to the 880 CPU board and is configured in the Analog Output Menu (ALGOUT) within the Setup Menu of
the 880. Configuration and calibration instructions for analog output are provided in the 880 Technical Manual (158387).
The indicator automatically recognizes all installed option cards when the unit is powered on. No hardware-specific
configuration is required to identify an installed option card to the system.
Manuals and additional resources are available from the Rice Lake Weighing Systems website at
Warranty information can be found on the website at
Always disconnect power before opening an enclosure or controller assembly. Option card is not hot swappable.
WARNING
Procedures requiring work inside the indicator must be performed by qualified service personnel only.
A grounding wrist strap must be worn to protect components from electrostatic discharge (ESD) when working
CAUTION
inside an enclosure or controller assembly.
Parts Breakdown
The Analog Output Option Card kit (179156) contains the necessary items used for installation of the option card.
Item No. Part No.
1 181658 Faceplate, Analog Output
2 164704 Board Assembly, Analog Output
3 14822 Screw, Machine 4-40 x 1/4
4 157173 Label, Analog Option 880
– 153878 Connector, 4 Position Screw Terminal
July 20, 2021
Series
™
3
2
1
4
Figure 1. Analog Output Option Card Parts Breakdown
Description
Table 1. Analog Output Option Card Parts List
www.ricelake.com/warranties
3
Qty. Item No. Part No.
1 – 53075
1 – 67550
4 – 15139
1 – 14621
1 – 200273
www.ricelake.com
Description
Clamp, Ground Cable Shield, 0.078''
Clamp, Ground Cable Shield, 0.125''
Washer, No. 10 Lock
Nut, Keps 6-32 Hex
Addendum, Analog Output Card
PN 200273 Rev B
Qty.
1
1
1
1
1