Brother FAX-2820 User Manual page 99

Chapter 11
DIFFICULTY
Print Quality Difficulties
Printed pages are curled.
Printed pages are smeared.
Printouts are too light.
Network Difficulties (MFC-7225N only)
I cannot print over the Network
11 - 14
SUGGESTIONS
Low quality thin or thick paper can cause this problem. Make sure you select the
Paper Type that suits the media type you use. (See About paper on page 1-8.)
The Paper Type setting may be incorrect for the type of print media you are
using—OR—The print media may be too thick or have a rough surface. (See
About paper on page 1-8 and Basic tab in the Software User's Guide on the
CD-ROM (MFC-7220 and MFC-7225N).)
If this problem occurs when making copies or printing received faxes, turn off
Toner Save mode in the machine´s menu setting. (See Toner Save on page 2-6.)
Set Toner Save mode to off in the Advanced tab in the printer driver.
(See Advanced tab in the Software User's Guide on the CD-ROM (MFC-7220 and
MFC-7225N).)
Make sure that your machine is powered on and is online and in Ready mode.
Print a Network Configuration list and check the current settings. (See Printing
reports on page 7-1.) Reconnect the LAN cable to the hub to verify that the cabling
and network connections are good. If possible, try connecting the machine to a
different port on your hub using a different cable. If the connections are good, the
machine shows LAN Active.