Brother FAX-2820 User Manual page 89

Chapter 11
ERROR MESSAGES
ERROR MESSAGE CAUSE
The machine has a mechanical
Unable to Init.
(Initialize) problem.
Unable to Print
Unable to Scan
Paper is not the correct size.
Wrong Paper
Size
11 - 4
ACTION
(For FAX-2920 and MFC-7225N)
Turn off the machine's power switch and then on
again. If the error message continues leave the
machine for several minutes and then try to print, copy
or scan again. (The machine can be turned off for up
to 4 days without losing faxes stored in the memory.)
(For FAX-2820 and MFC-7220)
When you turn off the machine's power switch its
memory will be cleared. To check whether the
machine has faxes in its memory, see Checking if the
machine has faxes in its memory on page 11-5. If there
are faxes you need to save them before following the
suggestions below (See Forwarding faxes to another
fax machine on page 11-5). For MFC-7220 also see
Transferring faxes to your PC (MFC-7220 and
MFC-7225N only) on page 11-5. Turn off the
machine's power switch and then on again. If the error
message continues, leave the machine for several
minutes and then try to print, copy or scan again.
Load the correct size of paper (Letter, Legal or A4) and
then press Start.