Brother FAX-2820 User Manual page 84

9
This product is equipped with a 2-wire
grounding type plug or a 3-wire grounding
type plug (Only for Singapore, Malaysia,
Hong Kong and India), a plug having two or
three pins. This plug will only fit into only a
grounding-type power outlet. This is a safety
feature. If you are unable to insert the plug
into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat
the purpose of the grounding-type plug.
0
Do not allow anything to rest on the power
cord. Do not place this product where people
can walk on the cord.
A
If an extension cord is used with this product,
make sure that the total ampere ratings on
the products plugged into the extension cord
do not exceed the extension cord ampere
rating.
B
Do not place anything in front of the machine
that will block received faxes. Do not place
nything in the path of received faxes.
C
Do not touch a document during printing.
D
Never push objects of any kind into this
product through cabinet slots, since they
may touch dangerous voltage points or short
out parts resulting in the risk of fire or electric
shock. Never spill liquid of any kind on the
product.
E
Do not attempt to service this product
yourself, as opening or removing covers may
expose you to dangerous voltage points
and/or other risks, and may void your
warranty. Please refer all servicing to our
Authorized Service Personnel. A list of
Authorized Service Centres has been
included for your convenience, or you may
contact the Brother Dealer for Service.
Important information
F
Unplug this product from the wall outlet and
refer servicing to Authorized Service
Personnel under the following conditions:
• If the power cord is damaged or frayed.
• If the product has been spilled by liquid.
• If the product has been exposed to rain or
water.
• If the product does not operate normally
when the operating instructions are
followed. Adjust only those controls that
are covered by the operating instructions.
Improper adjustment of other controls may
result in damage and will often require
extensive work by a qualified technician to
restore the product to normal operation.
• If the product has been dropped or the
cabinet has been damaged.
• If the product exhibits a distinct change in
performance, indicating a need for service.
G
To protect your product against power
surges, we recommend the use of a power
protection device (Surge Protector).
WARNING
For protection against the risk of electrical
shock, always disconnect all cables from the
wall outlet before servicing, modifying or
installing the equipment.
This equipment may not be used on coin
service lines provided by the telephone
company or connected to party lines.
Brother cannot accept any financial or other
responsibilities that may be the result of your
use of this information, including direct, special
or consequential damages. There are no
warranties extended or granted by this
document.
10
10 - 6