Brother FAX-2820 User Manual page 20

1
One-Touch Keys
These 10 keys give you instant access to
10 (MFC-7220 and MFC-7225N) or
20 (FAX-2820 and FAX-2920) previously
stored dial numbers.
2
Fax and telephone keys:
Redial/Pause
Redials the last number you called. It also
inserts a pause in quick dial numbers.
Hook/Hold/Recall*
Lets you dial telephone and fax numbers
without lifting the hand set.
—OR—
Lets you place telephone calls on hold.
*Recall: Australia and New Zealand only
Resolution
Sets the resolution when you send a fax.
3
Navigation keys:
Menu/Set
The same key is used for Menu and Set
operations.
Lets you access the Menu to program and
store your settings in the machine.
In standby mode you can press these keys to
adjust the ring volume.
▼ Search/Speed Dial
Lets you look up numbers that are stored in
the dialling memory. It also lets you dial
stored numbers by pressing # and a
three-digit number.
Press to scroll forward or backward to a
menu selection.
▲ or ▼
Press to scroll through the menus and
options.
4 Dial Pad
Use these keys to dial telephone or fax
numbers and as a keyboard for entering
information into the machine.
The # key lets you temporarily switch the
dialling mode during a telephone call from
Pulse to Tone. (Not available in New
Zealand)
5
Start
Lets you start sending faxes or make copies.
6
Stop/Exit
Stops an operation or exits from the menu.
7
Reports
Print the Transmission Verification Report,
Help List, Quick-Dial List, Fax Journal, User
Settings, Order Form and Network
Configuration*. (*MFC-7225N only)
8
Mode keys:
Fax
Lets you access Fax mode.
Scan
(MFC-7220 and MFC-7225N only)
Lets you access Scan mode.
Copy
Lets you access Copy mode.
9
Liquid Crystal Display (LCD)
Displays messages on the screen to help you
set up and use your machine.
@
Copy key (Temporary settings):
Options
You can quickly and easily select temporary
settings for copying.
A
Shift (FAX-2820 and FAX-2920 only)
To access One-Touch numbers 11 to 20,
hold down Shift as you press the One-Touch
key.
B Printer key:
(MFC-7220 and MFC-7225N only)
Job Cancel
You can cancel a print job and clear the
printer memory.
Introduction
1
1 - 6