Table of Contents
Advertisement
3550-US-5.0
6. SENDING FAXES
A)
DOCUMENT
The Size of Your Documents
216mm (8.5")
Maximum
The size of the documents you want to send by fax should not be larger (or smaller) than your fax
machine can accommodate. The documents should each be between 5.8 and 8.5 inches (148 and
216 mm) wide and between 3.9 and 35.4 inches (100 and 900 mm) long.
The maximum width of the scanned area, that can be printed on the recording paper of the
recipients fax, is 8.2 inches (208 mm).
How to Insert the Document
To send a fax, first insert the document you wish to send, face down, in the
document feeder. The top edge of the document should go in first, or the fax will
be received upside down.
To prevent the document from going crooked as it is fed, adjust the paper guides
to fit the width of the document.
About the Documents You Send...
Do not use documents that are curled, wrinkled, folded, ripped, or that contain
staples, paper clips, paste, or tape. Also, do not use cardboard, newspaper, or fabric.
wrinkled
BASICS
148mm
(5.8")
Minimum
900mm
(35.4")
NOTICE
curled
folded
NO !
ripped
DOCUMENT BASICS
4mm
100mm
(3.9")
scanned
(printed)
area
staples
paper clip
fabric
SENDING FAXES
216mm (8.5")
208mm (8.2")
4mm
TOP
tape
6 - 1
Advertisement
Table of Contents
Troubleshooting
