Roll Over Phone Lines; Two Line Phone System; Converting Telephone Wall Outlets - Brother INTELLIFAX IntelliFAX 3550 Owner's Manual

3550-US-5.0
SETUP & PREPARATION BEFORE USE
FOR YOUR INFORMATION

Roll Over Phone Lines

A roll over phone system is a group of two or more separate telephone lines that pass
incoming calls to each other if they are busy. The calls are usually passed down or
"rolled over" to the next available phone line in a preset order.
Your fax machine can work in a roll over system as long as it is the last
number in the sequence so the call can not roll away. Do not put the fax machine
on any of the other numbers. When the other lines are busy and a second fax call is
received, the fax call is transferred to a line that does not have a fax machine.

Two Line Phone System

A two line phone system is nothing more than two separate phone numbers on the same
wall outlet. The two phone numbers can be on separate jacks (RJ11) or combined into
one jack (RJ14). Your fax machine must be plugged into an RJ11 jack. RJ11 and RJ14
jacks may be equal in size and appearance and both may contain 4 wires (black, red,
green, yellow). To test the type of jack, plug in a two line phone and see if it can access
both lines. If it can, you must separate the lines for your fax machine.

Converting Telephone Wall Outlets

There are three ways to convert to an RJ11 receptacle. The first two ways may
require assistance from the telephone company. You can change the wall outlet from
one RJ14 jack to two RJ11 jacks. Or, you can have an RJ11 wall outlet installed and
slave or jump one of the phone numbers to it. The third way is the easiest. Buy a
triplex adapter.
You can plug a triplex adapter into an RJ14 wall outlet. It will separate the wires into
two separate RJ11 jacks (line 1, line 2) and a third RJ14 jack (lines 1 and 2). Plug the
fax machine into L2 of the triplex adapter.
RJ14
L1 L2 L1+L2
RJ11 RJ11 RJ14
Triplex Adapter
1 - 9