Table of Contents
Advertisement
3550-US-5.0
HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY
Level one
function
5 . USER
OPTIONS
3-4
3-4
3-4
3-4
3-4
Level two
Explanation of Options
function
Smoothing enhances the appearance of
incoming faxes.
If you set SMOOTHING to ON, you will
1. SMOOTHING
receive messages with the smoothing
enhancement.
ON/OFF
You can adjust the volume of the beeper with
this function.
2. BEEPER
OFF/LOW/HIGH
If you set COVERPAGE to ON, you can send
your documents with a Cover Page generated
by your machine. When the COVERPAGE
3. COVERPG
setting is ON, you can select a Cover Page
ON/OFF
comment.
ON/OFF
If you set ERROR RE-TRANSMISSION to
ON, the machine automatically sends the
4. ERROR RE-TX
page again after an error occurs.
ON/OFF
You can avoid having your incoming data
separated by printing a reduced copy of the
incoming document. The reduction methods
5. REDUCTION
are AUTO or Fixed ratio:
AUTO/100%/93%/87%/75%
You can select one of 3 sizes of recording
paper. The machine automatically will adjust
the size of the incoming document or original
6. RCD PAPER
document so that it fits the paper size you
have selected.
LETTER/LEGAL/A4
You can extend the life of the toner by
conserving its use.
7. TONER SAVE
ON/OFF
This mode reduces power consumption when
the machine is idle. The time period before
8. SLEEP MODE
the machine drops into Sleep Mode is user
selectable.
You can adjust Print Density with this
9. PRINT
function.
DENSITY
Factory
Page
setting
7-4
ON
LOW
4-1~2
OFF
6-16
OFF
6-20
AUTO
7-6~7
7-5
LETTER
OFF
7-8
3-9
00MIN
7-8
Advertisement
Table of Contents
Troubleshooting
