Table of Contents
Advertisement
SETTINGS TAB
The settings tab provides maintenance and connection tools for the
prosthesis. Certain functions are password-protected to prevent inadvertent
adjustments.
Bluetooth
By selecting Bluetooth in the Settings menu, you can disconnect from the current
Sense controller (if you wish to use your smart device to configure multiple Sense
controllers) as well as pair to a new one. You can also view the Bluetooth ID of the
currently connected Sense controller.
Note: If you exit the Bluetooth menu after disconnecting from the current Sense
controller, you will be taken to the splash screen. You can still reconnect or return to
the Bluetooth menu.
Pause Prosthesis
Tap the "Pause prosthesis" button to suspend movement of the prosthesis. This
does not power off the prosthesis components; it only blocks signal outputs that
cause movement in the arm. Tap "Resume prosthesis" to resume function. The
prosthesis will resume automatically upon exiting the app.
68
Example screen, actual listed
devices will vary
Device Configuration
Your device will be pre-configured
based on the order. The configuration
page lists the settings on the device,
these settings should reflect the
properties of the prosthesis being
controlled by the Sense system.
Tap "Modify" in the top right to begin
changing the device configuration.
You
will
be
prompted
with
password, which is IBT1997 to unlock
permanently, or Sense2017 to unlock
just for this use. Once cleared, each
editable row will have arrows providing
options in the next menu, and "Modify"
becomes "Save". To exit with saving,
tap "Discard" on the top left.
NOTE:
Changing
the
configuration to a setup that does
not match the prosthesis may result
in
undesirable
performance
in extreme cases, damage to the
prosthesis components.
Tap each row if you wish to change
the device configuration.
If your patient travels to other
countries, you may need to change
the region to avoid noise introduced
by power lines. (US - 60Hz, EU - 50Hz).
Once you are satisfied with the
changes, tap "Save" on the top right.
Wait for the Sense controller to
update. Previous calibration data will
be lost if new configuration is saved.
69
a
device
and
Advertisement
Table of Contents
