Infinite sense Installation And Setup Manual page 18

8 - Espire Elbow Pro / Hyrbid
1. Push the white rectangular connector into the beige port on the upper
data board.
2. Optional: If using a Hand with direct grip control, plug the black output
adapter cable into the two-pin beige connector P91 on the lower board.
P19
P91
P86
P3
P2
P9
P1
P4
P4
P10
P6
P7
P5
P8
34
9 - Michelangelo, Axon System
1. Plug the orange output cable with the black stripe and combined
red/gray cable to Channel 2 of the Axon bus as shown
2. Plug the orange output cable without the black stripe to Channel 1 of the
Axon bus as shown
CABLE HAS
BLACK STRIPE
CABLE HAS NO
BLACK STRIPE
35