Table of Contents
Advertisement
CALIBRATION SETUP TAB
Tap "Calibrate" on the bottom right to enter Calibration Setup. The Calibration
Setup screen is where the user can configure the calibration options.
Movements
The options that are selected in the "Recalibrating X Movements" dropdown
will be part of the pattern recognition algorithm after calibrating. At least one
movement must be selected at any given time.
The "In Use" toggle on the left indicates that the movement has calibration
data and is currently learned by the prosthesis.
•
Toggling the switch to "off" (gray) removes the movement from the
Sense classifier after updating.
•
If the toggle is turned on, and information exists for that movement,
that information will be used unless the movement is recalibrated.
Each row of the movements dropdown
shows the name of the movement,
a toggle to enable or disable its use
("in use"), a checkbox to mark it for
recalibration, and a description of final
status of the movement.
62
The checkbox on the right marks the
movements selected for calibration.
•
By checking the box, you
are choosing to replace the
movement information during
a new calibration.
•
If you tap a checkbox for a
movement that is not "In Use",
the toggle on the left will turn
on automatically.
Positions
Multi-positional calibration improves
the consistency of pattern recognition
in a wider range of the arm workspace.
For example, muscle signals will
appear differently whether the arm is
in front of the body, or raised above it.
You will calibrate all the movements
in each selected arm position before
moving to the next position, and the
data will be aggregated afterwards
into a single control. Up to 5 different
positions may be selected at once. At
least one position must be selected at
any given time.
The "In Use" toggle and recalibrate
checkbox work the same way as for
movements. Positions can be added
individually to increase the amount of
information.
63
Advertisement
Table of Contents
