Infinite sense Installation And Setup Manual page 27

Click Begin to start the calibration process. Outputs to the arm will be paused
for the duration of the calibration, therefore the patient will not be able to
control it. The Cue Delay time is indicated by the red border around the cue.
No data is collected during this time. Data is collected when the cue image
is surrounded by a green border. Each cue will be presented the number of
times determined by the Repetitions per Cue, for a duration determined by
the Cue Length (see Advanced Calibration Settings section).
After each position is calibrated, the patient will have time to rest and move
into the next position before continuing the calibration. Continue to the next
position by clicking Resume.
A few options exist during calibration that are explained below:
52
Pause
Calibration is paused until Resume is pressed to continue. No data is
collected.
Redo
Data from the current movement (single cue) is removed and the timer is
restarted.
Cancel
Cancels the current calibration process and removes the temporary data for
cues that were already calibrated
After calibrating all positions, click Save Calibration if you do not wish to redo
the calibration. Outputs to the arm will resume. Click Training Tools to use
the training games in the virtual environment.
Training Tools
By clicking on Training Tools after calibration or in the left menu, you will
enter the virtual training environment.
53