Infinite sense Installation And Setup Manual page 30

Note 2: For subsequent uses with the same Sense device, you will be shown
a splash page indicating that the App is attempting to connect to the last
connected Sense controller. You can interrupt this process (by tapping
"Stop") if you wish to connect to another controller. From this page, you can
either resume the connection by tapping "Options" or be transferred to the
Bluetooth page (see "Bluetooth" section on Page 62)..
Note 3: Sense cannot connect to Catalyst or the IBT App while an attached
TASKA Hand is connected to TASKA's HandCal Clinician software. Please
close HandCal Clinician before connecting to Sense.
58
SIGNALS SCREEN
After successful connection, the first
page will show you the electrode
signals. The color coding in the signal
viewer corresponds to the colors of the
electrode input cable connectors. Here,
you can:
• Make sure all electrodes
functioning correctly,
• Check for signal noise
• Verify that the patterns across the
electrodes are different
• View the current output from the
classifier
The signals screen has numerous
buttons for adjusting the signals and the
viewing options. A detailed description of
each button's function is given in the next
few sections.
Signal Settings
The button below the signal baseline
opens options to change signal settings.
Note: You must unlock this feature from
"Advanced Settings" to adjust gains.
Refer to the "Enable Advanced Settings"
section on Page 65.
Note 2: If you have saved Calibration
data, you must recalibrate after changing
any electrode settings in this screen,
otherwise the prosthesis may respond
incorrectly.
are
59