Manual Transmission - Brother FAX-T98 User Manual

■
The documents to be faxed must be from 148 mm to 216 mm
wide and 150 to 600 mm long.
■
The ADF can hold up to 10 pages, feeding each one
individually through the fax machine. Use standard 64 g/m
2
90 g/m
paper, feed each sheet individually to prevent paper jams.
■
Your machine cannot scan anything closer than 4 mm from
the edge of the paper.
■
Resolution
Press
resolution for the document you are sending. If you wish to
send in STANDARD resolution, i.e. a general fax with no
graphics, then the default is STANDARD , and the resolution
button need not be pressed. (See Fax resolution on page
6-6.)

Manual transmission

Manual transmission lets you hear the dialling, ringing and
fax-receiving tones while sending a fax.
1
Insert the document face down in the ADF.
2
Pick up the handset and listen for a dial tone.
—OR—
Speaker Phone
Press
3
Enter the fax number you want to call. (You can enter the digits
using the dial pad, or you can call using
or .)
4
When you hear the fax tone,
Start/Copy
press
5
If you're using the handset, hang up.
6 - 3 SETUP SEND
paper when using the ADF; if you are using heavier
(before you send the fax) to select the
and listen for a dial tone.
.
Search/Mute
and
SEND
2
~