Out of memory message
If you get an OUT OF MEMORY message while scanning the first page
Stop
of a fax, press
MEMORY message while scanning a subsequent page, you will have
the option to press
Stop
or to press
Depending on your typical faxes, OUT OF MEMORY errors can
occur frequently. If this happens, change the Memory
Transmission setting back to OFF .
Broadcasting
Using the numbers you have stored in Groups and Tel-Index
memory, you can "Broadcast" faxes automatically to a maximum of
100 different locations in a few simple steps.
After the Broadcast is completed, a Broadcast Report will be printed
automatically to let you know the results.
1
Insert the document face down in the ADF.
2
Menu/Set
Press
3
Search/Mute
Press
number by pressing
4
Repeat Step 3 to enter the next number.
5
Start/Copy
Press
memory, and then transmits it to all the numbers you entered. If
the line is busy, your machine will redial.
Stop
Press
Broadcast.
To cancel all locations, press
scheduled job on page 6-8.)
6 - 19 SETUP SEND
to cancel the scan. If you get an OUT OF
Start/Copy
to send the pages scanned so far,
to cancel the operation.
3
9
,
,
to set Memory Transmission ON .
. Then, select the Tel-Index or Group
or
. The fax machine stores the document in
during transmission to cancel the current fax
and then press
Menu/Set
4
,
. (See Cancelling a
Menu/Set
.