Setting the Station ID
You should store your name or company name and fax number to be
printed on all fax pages that you send.
It is important that you enter the fax and telephone numbers in the
internationally standardised format, i.e. in accordance with the
following strict sequence:
■
The "+" (plus) character (by pressing
■
Your Country Code (e.g. "44" for the United Kingdom, "41" for
Switzerland)
■
Your local area code minus any leading "0" ("9" in Spain)
■
A space
■
Your number on the local exchange, using spaces to aid
readability as appropriate.
As an example, if the machine is installed in the United Kingdom and
the same line is to be used for both fax and voice calls, and your
national telephone number is 0161-444 5555, then you must set the
fax and telephone number parts of your station ID as: +44 161444
5555.
1
Menu/Set
Press
2
Enter your fax number (up to 20
digits).
Menu/Set
Press
You cannot enter a hyphen.
3
Enter your telephone number (up to 20 digits).
Menu/Set
Press
(If your telephone number and fax number are the same, enter
the same number again).
The telephone number will appear on cover pages you send.
1
3
,
,
.
.
.
key)
3.STATION ID
INITIAL SETUP 4 - 2