Remote Retrieval; Using The Remote Access Code - Brother FAX-T98 User Manual

Remote Retrieval

You can call your machine from any touch tone phone (or remote
Group 3 fax machine set for tone) and use a Remote Access Code
and Remote Control Commands to retrieve voice (and fax)
messages. You can also program and change some settings for your
Message Manager.

Using the Remote Access Code

1
Dial your machine phone number from a touch tone phone.
2
When your machine answers and beeps, immediately enter
your Remote Access Code.
3
The machine signals the following kinds of messages received.
1 long beep—Fax message(s)
2 long beeps—Voice message(s)
3 long beeps—Fax and Voice message(s)
No beeps—no messages
4
The machine then prompts you with two short beeps to enter a
command. If you wait longer than 30 seconds to enter a
command, the machine hangs up. If you enter an invalid
command, the machine beeps three times.
5
9 0
Press to reset the machine when you finish.
6
Hang up.
MESSAGE MANAGER 8 - 14