Setting the Beeper Volume
You can change the beeper volume. The default (original) setting is
LOW . When the beeper is on, the fax machine beeps every time you
press a key or make a mistake and when a fax is being sent or
received.
1
Menu/Set
Press
( LOW , HIGH or OFF )
2
Press
or
option.
3
When the LCD shows the option you want.
Menu/Set
Press
4
Stop
Press
Setting the Speaker Volume
You can adjust the speaker volume. Press
you can adjust the volume. Press
the volume level. The display shows the setting you are choosing.
Each key press change the volume to the next setting. The new
setting will remain until you change it again.
You can adjust the speaker volume while you are listening to
your OGM (Outgoing Message) and ICMs (incoming messages).
If you turn Incoming Recording Monitor to OFF (
the Speaker for screening calls will be disabled and you won't
hear callers leaving messages. The volume for other operations
can still be controlled using
Setting the Ring Volume
You can adjust the ring volume when your machine is idle. You can
select a ring volume level or press until the ring is off.
Press
then press
key press, your machine rings so you can hear the current setting
and the screen displays the setting you are choosing. Each key press
changes the volume to the next setting. The new setting will remain
until you change it again.
4 - 5 INITIAL SETUP
1
4
,
,
.
to select your
.
.
or
to adjust the volume level. With each
4.BEEPER
Speaker Phone
then press
Menu/Set
.
before
or
to adjust
8
5
,
,
),