Table of Contents
Advertisement
Available languages
Available languages
V1.0
INTRODUCTION
This Air Punch and Flange Tool is a versatile 2-in-1 air tool designed to crimp
and punch mild steel. Its 7/8 in. crimp width and 5/16 in. punch diameter
makes this an ideal tool for welding and riveting applications.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection
and maintenance instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-
lit and free of distractions. Place lights so you are not working in a
shadow.
2.
Keep anyone not wearing the appropriate safety equipment away from
the work area.
3.
Store unused tools properly in a safe and dry location to prevent rust
or damage. Lock tools away and keep out of the reach of children.
4.
Do not install or use in the presence of flammable gases, dust or
liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply with
CSA Z94.3-07 or ANSI Z87.1 standards based on the type of work
performed.
2.
Wear the appropriate type of full-face shield in addition to safety
googles, as the work can create chips, abrasive or particulate matter.
3.
Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
4.
Wear protective clothing designed for the work environment and tool.
Visit www.princessauto.com for more information
5/16 in. Straight Grip Air Punch and Flange Tool
8843773
3
Advertisement
Table of Contents
