Work Area Safety; Personal Safety - Power Fist 8957425 User Manual

V4.0
There are specific applications for which the product was designed.
• Use the right tool for the job. DO NOT attempt to force small equipment to
do the work of larger industrial equipment. There are certain applications
for which this equipment was designed. This product will be safer and do a
better job at the capacity for which it was intended. DO NOT use this
equipment for a purpose for which it was not intended.
• Industrial or commercial applications must follow OSHA requirements.

WORK AREA SAFETY

•
Inspect the work area before each use. Keep work area clean, dry, free of
clutter, and well-lit. Cluttered, wet, or dark work areas can result in injury.
Using the product in confined work areas may put you dangerously close to
cutting tools and rotating parts.
• Do not use the product where there is a risk of causing a fire or an
explosion; e.g., in the presence of flammable liquids, gases, or dust. The
product can create sparks, which may ignite the flammable liquids, gases,
or dust.
•
Do not allow the hammer to come into contact with an electrical source.
The tool is not insulated and contact will cause electrical shock.
•
Keep children and bystanders away from the work area while operating the
tool. Do not allow children to handle the product.
•
Be aware of all power lines, electrical circuits, water pipes, and other
mechanical hazards in your work area. Some of these hazards may be
hidden from your view and may cause personal injury and/or property
damage if contacted.

PERSONAL SAFETY

• Stay alert, watch what you are doing, and use common sense when
operating the tool. Do not use the tool while you are tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while
operating the tool may result in serious personal injury.
•
Dress properly. Do not wear loose clothing, dangling objects, or jewelry.
Keep your hair, clothing and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts. Air vents on the tool
Visit www.princessauto.com for more information
120V 1,000 BPM Demolition Hammer Kit 8957425
3