Table of Contents
Advertisement
Available languages
Available languages
V4.1
WARNING! This notice indicates a specific hazard or unsafe practice that
could result in severe personal injury or death if the proper
precautions are not taken.
CAUTION!
This notice indicates a potentially hazardous situation that may result
in minor or moderate injury if proper practices are not taken.
NOTICE!
This notice indicates that a specific hazard or unsafe practice will
result in equipment or property damage, but not personal injury.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions.
2.
Keep anyone not wearing the appropriate safety equipment away from the
work area.
3.
Store unused tools properly in a safe and dry location to prevent rust or
damage. Lock tools away and keep out of the reach of children.
4.
Do not install or use in the presence of flammable gases, dust or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear the appropriate type of full-face shield in addition to safety googles,
as the work can create chips, abrasive or particulate matter.
3.
Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
a.
Do not wear gloves when operating a tool that can snag the material
and pull the hand into the tool.
4.
Wear protective clothing designed for the work environment and tool.
5.
Non-skid footwear is recommended to maintain footing and balance in the
work environment.
Visit www.princessauto.com for more information
6 in. Bench Mount Buffer
8502494
3
Advertisement
Table of Contents
