Power Fist 8885642 Manual

Power Fist 8885642 Manual

Wind_back tool kit brake caliper
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

V1.0
8885642
Please read and understand all instructions before use. Retain this manual for
future reference.

Advertisement

Table of Contents
loading

Summary of Contents for Power Fist 8885642

  • Page 1 V1.0 8885642 Please read and understand all instructions before use. Retain this manual for future reference.
  • Page 2: Specifications

    8885642 Brake Caliper Wind-Back Tool Kit V1.0 SPECIFICATIONS Number of Pieces Fits See Appendix A Overall Length 6.7 in. Material Carbon Steel Handle Type Sliding T-handle Handle Material Carbon Steel Finish Sandblast HAZARD DEFINITIONS Please familiarize yourself with the hazard notices found in this manual. A notice is an alert that there is a possibility of property damage, injury or death if certain instructions are not followed.
  • Page 3: Work Area

    V1.0 Brake Caliper Wind-Back Tool Kit 8885642 INTRODUCTION The Brake Caliper Wind-Back Tool Kit has 14 adapters to reset the brake caliper for a variety of vehicle models. The set comes with two wind-back tools and spreaders to work on two calipers at once.
  • Page 4: Personal Precautions

    8885642 Brake Caliper Wind-Back Tool Kit V1.0 PERSONAL PRECAUTIONS Control the tool, personal movement and the work environment to avoid personal injury or damage to tool. Do not operate any tool when tired or under the influence of drugs, alcohol or medications.
  • Page 5: Assembly And Installation

    V1.0 Brake Caliper Wind-Back Tool Kit 8885642 IDENTIFICATION KEY Handle Bolt Tightening Screw Cap Adapter Pins Disc Pad Spreader Wind-Back Tool Fig. 1 Adapter Plates ASSEMBLY & INSTALLATION Letter references in parenthesis (A) refer to the included Identification Key. Pull the handle (A) fully to one side.
  • Page 6: Care And Maintenance

    8885642 Brake Caliper Wind-Back Tool Kit V1.0 CARE & MAINTENANCE Maintain the tool with care. A tool in good condition is efficient, easier to control and will have fewer problems. Inspect the tool components periodically. Repair or replace damaged or worn components.
  • Page 7 V1.0 Brake Caliper Wind-Back Tool Kit 8885642 APPENDIX A VEHICLE ADAPTER LIST ADAPTER #0 ADAPTER #4 General Motors Alfa Romeo 164 2.0 Cadillac Seville and Eldorado Fiat Ford Telstar and Laser General Motors Saturn, Grand Prix ADAPTER #1 and Lumina...
  • Page 8 8885642 Brake Caliper Wind-Back Tool Kit V1.0 ADAPTER #8 ADAPTER F General Motors Opel Corsa, Astra, Zafira and Vectra ADAPTER #9 ADAPTER K General Motors Citroen C3 and C5 Cadillac Seville Eldorado ADAPTER M Ford ADAPTER A Renault R21 and Laguna...
  • Page 9 V1.0 8885642 Please read and understand all instructions before use. Retain this manual for future reference.
  • Page 10: Spécifications

    8885642 Trousse d'outils de rappel d'étrier de frein V1.0 SPÉCIFICATIONS Nombre de pièces Convient See Appendices A Longueur hors tout (po) 6,7 po Matériau Acier au carbone Type de manche Poignée en T coulissante Matériau de manche Acier au carbone...
  • Page 11: Aire De Travail

    V1.0 Trousse d'outils de rappel d'étrier de frein 8885642 INTRODUCTION La trousse d’outils de rappel d’étrier de frein comprend 14 adaptateurs pour régler les étriers de frein dans une variété de modèles de véhicules. L’ensemble est livré avec deux outils de rappel noirs et d’écarteurs pour travailler sur deux étriers en même temps.
  • Page 12: Précautions Personnelles

    8885642 Trousse d'outils de rappel d'étrier de frein V1.0 Les chaussures antidérapantes sont recommandées pour maintenir la stabilité et léquilibre au sein de lenvironnement de travail. Portez des chaussures à embout dacier ou à coquilles dacier pour éviter les blessures aux pieds dues à la chute dobjets.
  • Page 13: Assemblage Et Installation

    V1.0 Trousse d'outils de rappel d'étrier de frein 8885642 DÉBALLAGE AVERTISSEMENT ! Ne faites pas fonctionner loutil si des pièces sont manquantes. Remplacez les pièces manquantes avant lutilisation. Le non-respect de cet avertissement peut entraîner une défectuosité et des blessures graves.
  • Page 14: Soin Et Entretien

    8885642 Trousse d'outils de rappel d'étrier de frein V1.0 UTILISATION Consultez le manuel du propriétaire du véhicule ou le manuel d’entretien des pièces pour le mode d’installation et d’entretien du système d’étrier de frein. Alignez les goupilles de la plaque d’adaptation avec les ouvertures sur le piston d’étrier du véhicule et le siège de la plaque.
  • Page 15: Mise Au Rebut

    V1.0 Trousse d'outils de rappel d'étrier de frein 8885642 LUBRIFICATION Inspectez et lubrifiez loutil au besoin. Utilisez uniquement une huile pour huile légère pour lubrifier loutil. Les autres lubrifiants pourraient ne pas convenir et risqueraient dendommager loutil ou de causer un mauvais fonctionnement durant lutilisation.
  • Page 16 8885642 Product name french V1,0 ADAPTATEUR n Toyota Celica, Corolla GT, MR2 et GTI Alfa Romeo 164 2.0 Fiat ADAPTATEUR n Ford Telstar et Laser General Motors General Motors Saturn, Grand Prix et Lumina Honda Prelude et CRX ADAPTATEUR n...

Table of Contents