Table of Contents
Advertisement
You can manage the endpoints using an Extron NAVigator System Manager (see figure 1).
The base version of the NAVigator can control up to 16 endpoints with an expansion option
that can accommodate up to 240 endpoints.
PC
PC
Extron NAV E 101 #1
INPUT
CONTROL
POWER
12V
AUDIO
2.0 A MAX
L
R
CONT
RS-232
IR
HDMI
LOOP THRU
C T Tx Rx G S G
Extron NAV E 101 #2
INPUT
CONTROL
POWER
12V
AUDIO
2.0 A MAX
L
R
CONT
RS-232
IR
HDMI
LOOP THRU
C T Tx Rx G S G
Extron NAV E 101 #3
NAV Encoder n
INPUT
CONTROL
POWER
12V
AUDIO
2.0 A MAX
L
R
CONT
RS-232
IR
HDMI
LOOP THRU
C T Tx Rx G S G
Extron NAV E 101 #n
INPUT
CONTROL
POWER
12V
AUDIO
2.0 A MAX
L
R
CONT
RS-232
IR
HDMI
LOOP THRU
C T Tx Rx G S G
Figure 1.
The streamed NAV signal can also be routed using a managed network switch and can be
dedicated to a specific VLAN. AV switching can be done via a control system by interfacing
to the NAV decoder or the NAVigator.
NOTE: The RS-232 and IR communications are a passive pass-through only.
About the Decoder
One or more compatible decoders, such as the NAV SD 501 or NAV SD 101, decode the
data stream back into the original video and audio signal formats and output them locally.
About all Units in the System
Each encoder and decoder has an integrated web interface. All normal system configuration
and control is via the web interface of the NAVigator. Using a computer on the same network
and a standard web browser; such as Google Chrome™, Mozilla™ Firefox™, or Microsoft
Edge™; you can configure any encoder or decoder unit in the system.
The embedded audio can be transported as a 2-channel LPCM uncompressed stream.
Audio can follow video to the same decoder or be broken away to a different endpoint.
A dedicated RS-232 port is available for distributing RS-232 data with the coded/decoded
video, such as for control of a projector.
The units are housed in 1-inch high, half-rack width metal enclosures that can be mounted
in any standard 19-inch rack or under furniture with optional mounting kits.
The external 100 VAC to 240 VAC, 50-60 Hz power supply provides worldwide power
compatibility.
e
Control
Network
NAV E 101
RESET
NAV 1G/PoE+
NAV E 101
RESET
Streaming
NAV 1G/PoE+
Network
NAV E 101
RESET
NAV 1G/PoE+
NAV E 101
RESET
NAV 1G/PoE+
Typical NAV Application
The encoder and decoder do not generate or respond to the RS-232 and IR
communication signals.
NAV SD 501 and NAV SD 101 Scaling Decoders • Introduction
NAVigator
LAN
00 B
NAV
LNK
CONFIG
ACT
NAVigator
OOB
NAV/PoE
Extron NAV SD 101 #1
POWER
12V
2.0 A MAX
Extron NAV SD 101 #2
POWER
AV
12V
2.0 A MAX
Extron NAV SD 101 #3
POWER
12V
2.0 A MAX
Extron NAV SD 101 #n
POWER
12V
2.0 A MAX
OUTPUT
CONTROL
AUDIO
L
R
RS-232
IR
HDMI
Tx Rx G S G
NAV 1G/PoE+
OUTPUT
CONTROL
AUDIO
L
R
RS-232
IR
NAV 1G/PoE+
HDMI
Tx Rx G S G
OUTPUT
CONTROL
AUDIO
L
R
RS-232
IR
HDMI
Tx Rx G S G
NAV 1G/PoE+
OUTPUT
CONTROL
AUDIO
L
R
RS-232
IR
NAV 1G/PoE+
HDMI
Tx Rx G S G
NAV SD 101
RESET
NAV SD 101
RESET
NAV SD 101
RESET
NAV SD 101
RESET
®
2
Advertisement
Table of Contents
